Stand next to a 1970s Bally pinball table and a 1970s Bally slot machine and squint. The lit backglass, the chunky chrome trim, the bell, the scoring reels, the satisfying thunk of a mechanism doing its job. They look like cousins because they are. Same company, same city, often the same workbenches.

Most of us file pinball under “arcade” and slot machines under “casino” and never connect them. The factories never made that split.

Chicago, the capital of coin-op

If you want to understand why, start with geography. For roughly eighty years, Chicago was the centre of the coin-operated amusement trade, and the Chicago Sun-Times has a good account of how a handful of companies turned the city into one giant machine shop. Cabinet makers, wiring crews, coin mechanism specialists and artists who painted backglasses all lived within a few miles of each other.

That ecosystem did not care what the finished machine was for. A coin chute is a coin chute. A solenoid that kicks a ball into a bumper can also drive a payout slide. A woodworker who builds a sturdy cabinet for a table can build one for a three-reel upright.

So the big names did both. Gottlieb, one of the oldest names in the business, built pinball tables and sold into the wider coin-op trade. Williams made its name in pinball and kept one foot in gambling equipment. And Bally, the company most people associate with a certain kind of Vegas floor, started life making pinball tables in the 1930s before becoming a giant in slots.

The flipper changes everything

Here is the part that surprises people. Early pinball was a gambling-adjacent game of pure chance. You pulled a plunger, the ball bounced around, and where it landed was mostly luck. Some operators paid out prizes, which got the whole category banned in several American cities for years.

Then, in 1947, came the flipper. Once a player could nudge the ball back into play, pinball became a game of skill, and that single mechanical change is what let it climb out of the gambling gutter and into arcades, bars and eventually bedrooms. It is one of the most important design decisions in coin-op history, and it came from the same industry that was busy building machines whose whole purpose was to stay random.

Think about what that means for the people on the factory floor. One team is engineering a table where skill should beat luck. Down the hall, another team is engineering a machine where luck must always beat skill, because the maths has to hold. Same company, same pay packet, opposite design philosophies. And the knowledge swapped constantly: how to make a mechanism survive a million plays, how to make a light flash at the right moment to keep someone feeding in coins.

The Strong National Museum of Play has a pinball history archive that shows Bally, Midway and Williams building pinball and mechanical slot machines side by side in Chicago, and it is worth an afternoon if you like seeing the paperwork behind the nostalgia.

Where the theme tradition comes from

Now the interesting bit for anyone who grew up with licensed pinball. Why does a modern slot machine carry a movie logo, a rock band, a TV show? Because the factories already knew how to do it.

Pinball makers learned early that a theme sells. A table is a three-minute story told through art, sound and rules. Put a recognisable brand on the backglass and a stranger walks across the bar to drop a coin in. Williams and Bally built entire catalogues on that idea, with tables built around films, bands and sports, and the same licensing instinct carried straight over to their gambling lines.

That tradition never left. Walk through today’s Stern lineup and you get The Mandalorian and AC/DC, the same playbook that put a licence on a backglass fifty years ago. The only real difference is the hardware inside. Plenty of today’s slot libraries are built the same way, with a licensed or themed title, a bonus round that plays like a mini-game, and sound design that rewards you the instant something happens. If you grew up on tables with multiball and mode wizards, that structure feels familiar for a reason.

The connection between pinball and modern slots goes beyond artwork. Both rely on recognisable themes, bonus features, distinctive sound effects and visual sequences that make each game feel different. Online casinos have carried that tradition into digital libraries, where classic three-reel fruit machines sit alongside elaborate video slots inspired by films, mythology and popular culture.

 

That variety also shapes how casino platforms are compared today. Guides covering the best offshore casinos examine international sites for US players, including their slot selections, game libraries, payment options and bonus terms. It is another example of how the mechanical entertainment industry evolved into a much broader digital gaming market.

 

The point is the lineage. A Williams designer in 1985 who wanted a bonus round to feel like an event was solving the same problem as a slot designer today. How do you make the next ten seconds feel unmissable?

 

What the hardware gave each side

It helps to be specific about what moved between the two worlds.

From pinball to slots: the idea that sound and light are part of the game, not decoration. A table that goes quiet when you lose and erupts when you score trains you to chase the eruption. Slot designers took that lesson whole.

From slots to pinball: reliability engineering and the discipline of mechanisms that run unattended for years. A casino floor machine cannot jam, because a jammed machine earns nothing. That obsession with durability fed back into how tables were built for bars and arcades, where a broken flipper means an empty cabinet.

And both sides shared the business model of the operator route. Machines were rarely sold to the person who played them. They were placed in venues, shared revenue with the location, and serviced by route men with toolboxes. If you have ever seen an old coin-op ledger, you will notice slots and pinball sit on the same pages.

Seeing it for yourself

The best way to feel this history is to see a working factory. Scripps News went inside the largest pinball factory in suburban Chicago, where tables are still assembled by hand, and the line looks startlingly like what a photo from the 1960s would show: wiring harnesses laid out on benches, playfields lifted in by workers, a tester dropping balls on every finished table.

It is a reminder that the craft never disappeared. What changed is that pinball narrowed to a collector and hobbyist market, while slots went almost entirely digital. If you want to see the nostalgic pinball side of that split, our write-up on Pokémon Pinball shows how the same ball-and-flipper idea shrank down onto a handheld, which is its own proof of how portable the format turned out to be.

Why it still matters to collectors

If you collect, you already know the pull. A restored table is a time capsule of art, engineering and a particular era’s taste. But it helps to know that the cabinet next to it, the one with the reels, shares a bloodline.

Some collectors lean into that. They pair a Bally table with a Bally reel machine in the same room and let guests work out which one is which. Others find the crossover in the art itself, because the same illustrators often painted for both. And a few simply enjoy knowing that the bell they hear on a vintage slot is cousin to the bell in their favourite pinball.

None of that requires you to care about gambling. It is hardware history, and hardware history is what this magazine is for.

FAQ

Did the same companies really make pinball and slot machines? Yes. Bally began by making pinball tables in the 1930s and grew into a major slot manufacturer, and Williams and Gottlieb also worked across both coin-op categories. Chicago’s shared supplier network made it natural to build both from the same factories.

What made pinball a game of skill instead of chance? The flipper, introduced in 1947. Before it, the player launched the ball and watched it bounce randomly. Flippers let players return the ball to play, which shifted the game toward skill and helped it escape gambling bans.

Why do modern slots use movie and band licences? The habit comes from pinball. Manufacturers learned that a recognisable brand on the backglass drew players in, and the same licensing approach carried over to their gambling machines and later to digital slot libraries.

Are old pinball tables and slot machines made the same way? They share the same building blocks: cabinets, solenoids, coin mechanisms, lights and sound. The main difference is purpose, since slot mechanisms are built so the maths always holds, while pinball mechanisms are built so skill matters.

Is Chicago still a coin-op manufacturing hub? Pinball manufacturing still lives in suburban Chicago, where tables are assembled by hand. The wider slot industry has largely moved to digital and spread across other regions.